R&S ESR Series User Manual page 210

Emi test receiver
Table of Contents

Advertisement

®
R&S
ESR
Remote command:
CALCulate<n>:THReshold:STATe
CALCulate<n>:THReshold
Use Zoom Limits ← Search Limits
Restricts the marker search to the zoomed area.
Note that the marker zoom is only available in Spectrum mode.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:ZOOM
Search Lim Off ← Search Limits
Deactivates all limits of the search range.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
CALCulate<n>:THReshold:STATe
Peak Excursion
Opens an edit dialog box for level measurements to enter the minimum level value by
which a signal must rise or fall so that it will be identified as a maximum or a minimum
by the search functions. Entries from 0 dB to 80 dB are allowed; the resolution is 0.1
dB. The default setting for the peak excursion is 6 dB.
Remote command:
CALCulate<n>:MARKer<m>:PEXCursion
5.4.2.3
Markers in Spectrograms
In addition to the marker functionality described above, spectrograms support the fol-
lowing marker positioning functionality.
Search
Search Mode
Opens a submenu to select the marker search mode.
Next Mode X ← Search Mode
Sets the search mode for the marker peak search if a search in the x-direction is
active. Three modes are available:
"<"
"abs"
">"
User Manual 1175.7068.02 ─ 12
Mode...............................................................................................................207
Next Mode
X................................................................................................. 207
Next Mode
Y................................................................................................. 208
Marker Search
Type......................................................................................208
Select Search
Area....................................................................................... 208
Sets the active marker/delta marker to the next maximum/minimum
left of the marker of the selected trace.
Sets the active marker/delta marker to the next lower maximum/
higher minimum of the selected trace.
Sets the active marker/delta marker to the next maximum/minimum
right of the marker of the selected trace.
on page 865
on page 865
on page 864
on page 865
on page 679
Receiver Mode
Common Analysis Functions
on page 690
207

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents