R&S ESR Series User Manual page 548

®
R&S ESR
●
"Set to Default"
Select Print Color Set ← Colors
For details see
Color (On/Off) ← Colors
For details see
Select Object ← Colors
For details see
Predefined Colors ← Colors
For details see
User Defined Colors ← Colors
For details see
Set to Default ← Colors
For details see
Comment
Opens dialog box to enter a comment. Max. 120 characters are allowed. 60 characters
fit in one line. In the first line, at any point a manual line-feed can be forced by entering
"@".
Date and time are inserted automatically. The comment is printed below the diagram
area, but not displayed on the screen. If a comment should not be printed, it must be
deleted.
For details on the alphanumeric entries refer to
meric
Remote command:
HCOPy:ITEM:WINDow:TEXT
Install Printer
Opens the "Printers and Faxes" window to install a new printer. All printers that are
already installed are displayed.
For further information refer to
on page 54.
Only user accounts with administrator rights can install a printer.
Report
Provides access to the test report tool. For more information see
ing with Test
User Manual 1175.7068.02 ─ 12
on page 545
"Select Print Color Set"
"Color (On/Off)"
"Select Object"
"Predefined Colors"
"User Defined Colors"
"Set to Default"
Parameters", on page 78.
Reports", on page 546.
Data Management and Documentation
Measurement Documentation – PRINT Key
on page 523 softkey of the "Setup" menu.
on page 522 softkey of the "Setup" menu.
on page 522 softkey of the "Setup" menu.
on page 522 softkey of the "Setup" menu.
on page 522 softkey of the "Setup" menu.
on page 522 softkey of the "Setup" menu.
Chapter 3.4.3.2, "Entering Alphanu-
on page 962
Chapter 3.2.4.6, "Selecting and Configuring Printers",
Chapter 10.3, "Work-
545