R&S ESR Series User Manual page 479

Emi test receiver
Table of Contents

Advertisement

®
R&S
ESR
8 Tracking Generator
Equipped with option R&S FSV-B9, an internal tracking generator emits a signal at the
exact input frequency of the analyzer during operation. The generated signal is sent to
the DUT, thus allowing the analyzer to control the input frequency of the device directly.
When you equip the R&S ESR with option R&S FSV-B10, you are also able to control
various commercially available generators as a tracking generator.
Tracking generator control is available in "Spectrum" and "I/Q Analyzer" mode for fre-
quency, time or I/Q measurements. Special measurement functions are not available
with tracking generator control. The corresponding softkeys in the "Measurement"
menu are deactivated in this case.
Menu and softkey description
Chapter 8.1, "Softkeys of the Tracking Generator
Further information
8.1 Softkeys of the Tracking Generator Menu
The "Tracking Generator" menu is displayed when you press the INPUT/OUPUT key
and then "Tracking Generator".
This softkey is only available if the R&S FSV option Tracking Generator (B9) or Exter-
nal Tracking Generator (B10) or both are installed. The following table shows all soft-
keys available in the "Tracking Generator" menu.
As long as a tracking generator is active, the HOME key also displays the "Tracking
Generator" menu.
Source RF Internal (On/
Source
Source
Modulation...................................................................................................................479
User Manual 1175.7068.02 ─ 12
Off)....................................................................................... 477
Power..............................................................................................................477
Cal.................................................................................................................. 477
Calibrate
Transmission................................................................................. 477
Calibrate Reflection
Calibrate Reflection
└ Normalize......................................................................................................478
Reference Value
Position..............................................................................478
Reference
Value........................................................................................... 478
└ Recall............................................................................................................ 478
Save As Trd
Factor....................................................................................... 479
External
AM.................................................................................................. 479
External
FM...................................................................................................479
External
I/Q................................................................................................... 479
Modulation
OFF............................................................................................ 479
Softkeys of the Tracking Generator Menu
Short............................................................................. 477
Open.............................................................................477
Tracking Generator
Menu",
on page 476
476

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents