R&S ESR Series User Manual page 306

®
R&S ESR
For more information see
Remote command:
LISN type:
INPut:LISN[:TYPE]
Phase:
INPut:LISN:PHASe
Highpass filter:
INPut:LISN:FILTer:HPAS[:STATe]
Peak Search
The reference section contains an overview of all functions that are part of the chapter
and lists the associated elements of the user interface.
Auto Peak Search
Turns the automatic marker peak search on and off.
For more information see
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PSEarch:AUTO
on page 781
Marker Configuration
To make the process of configuring markers as easy as possible, the R&S FSV-K54
features a "Marker Configuration" dialog box that contains all marker characteristics
necessary to perform successful EMI measurements.
The dialog box is made up out of two tabs. The first tab controls markers 1 to 8, the
second tab controls markers 9 to 16.
User Manual 1175.7068.02 ─ 12
Chapter 5.2.5, "V-Networks Control
on page 686
on page 686
on page 685
"Performing a Peak Search"
Spectrum Measurements
Measurements
(LISN)", on page 173.
on page 299.
303