R&S ESR Series User Manual page 465

®
R&S ESR
"I/Q-Vector"
"Real/Imag
(I/Q)"
Remote command:
CALCulate<n>:FORMat
C/N, C/No ← I/Q Analyzer
Opens a submenu to configure the carrier/noise ratio measurement. Measurements
without (C/N) and measurements with reference to the bandwidth (C/No) are possible.
User Manual 1175.7068.02 ─ 12
Softkeys and Parameters of the I/Q Analyzer Menu
Displays the captured samples in an I/Q-plot. The samples are con-
nected by a line.
Displays the I and Q values in separate diagrams.
on page 888
I/Q Analyzer
462