R&S ESR Series User Manual page 356

®
R&S ESR
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISP:WIND:TRAC:Y 10DB, see
on page 844
Range Log 5 dB ← Range
Sets the level display range to 5 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISP:WIND:TRAC:Y 5DB, see
on page 844
Range Log 1 dB ← Range
Sets the level display range to 1 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISP:WIND:TRAC:Y 1DB, see
on page 844
Range Log Manual ← Range
Opens an edit dialog box to define the display range of a logarithmic level axis man-
ually.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
Range Linear % ← Range
Selects linear scaling for the level axis in %.
The grid is divided into decadal sections.
Markers are displayed in the selected unit ("Unit" softkey). Delta markers are displayed
in % referenced to the voltage value at the position of marker 1. This is the default set-
ting for linear scaling.
Remote command:
DISP:TRAC:Y:SPAC LIN, see
on page 668
User Manual 1175.7068.02 ─ 12
on page 668
on page 668
on page 668
on page 668
DISPlay[:WINDow<n>]:TRACe<t>:Y:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
DISPlay[:WINDow<n>]:TRACe<t>:Y:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
DISPlay[:WINDow<n>]:TRACe<t>:Y:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
DISPlay[:WINDow<n>]:TRACe<t>:Y:
on page 844
DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing
Spectrum Measurements
Configuration
353