R&S ESR Series User Manual page 876

®
R&S ESR
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
This command queries the result of the phase noise measurement.
If necessary, the command activates the measurement first..
Suffix:
<n>
<m>
Example:
Usage:
Manual operation:
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise[:STATe] <State>
This command turns the phase noise measurement at the delta marker position on and
off.
The correction values for the bandwidth and the log amplifier are taken into account in
the measurement.
The reference marker for phase noise measurements is either a normal marker or a
fixed reference. If necessary, the command turns on the reference marker
A fixed reference point can be modified with the
FUNCtion:FIXed:RPOint:X
FIXed:RPOint:Y
Suffix:
<n>
<m>
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
ON | OFF
*RST: OFF
CALC:DELT:FUNC:PNO:AUTO ON
Activates an automatic peak search for the reference marker in
a phase-noise measurement.
See "Ph. Noise Auto Peak Search"
.
Selects the measurement window.
2
Marker 2 is always the deltamarker for phase noise measure-
ments.
CALC:DELT2:FUNC:PNO:RES?
Outputs the result of phase-noise measurement of the delta-
marker 2.
Query only
See "Phase Noise On/Off"
and
CALCulate<n>:DELTamarker<m>:FUNCtion:
commands independent of the position of marker 1 and of a trace.
.
Selects the measurement window.
irrelevant
Note: marker 2 is always the deltamarker for phase noise mea-
surement results.
Remote Control
on page 419
on page 418
CALCulate<n>:DELTamarker<m>:
873