Brief Introduction To Remote Control; Basic Steps In Remote Control Programming - R&S ESR Series User Manual

Emi test receiver

Table of Contents

OFF] key on the front panel; see

You can alter these settings and define a settings file to be loaded. This requires per-

forming the following procedure. Be aware that the chosen settings file is loaded both

while booting and presetting.

1. Press the [SAVE/RCL] key.

2. Press the "Startup Recall" softkey.

3. Press the "Startup Recall (On/Off)" softkey to activate the recall function.

4. Press the "Select Dataset" softkey.

The "Startup Recall" dialog box is displayed.

5. If necessary, select the path under which the file to be loaded is stored.

6. Select the settings file to be loaded (DFL file).

7. Press the "Select" button in the dialog box.

3.6 Brief Introduction to Remote Control

The instrument can be remote-controlled via the network (LAN interface). For details

on configuring the LAN interface see

Connection",

For details on setting the interface see

The following programming examples are structured hierarchically, i.e. the later exam-

ples are based on the preceding ones. This allows you to easily assemble a well-func-

tioning program by using the modules of the program examples. More complex exam-

ples are provided in the User Manual, chapter "Remote Control - Programming Exam-

The following examples explain how to program the instrument and can be used as a

basis for solving enhanced programming tasks.

Visual Basic was used as the programming language. However, the programs can be

implemented in other languages as well.

User Manual 1175.7068.02 ─ 12

on page 44. If the instrument is preset, it loads the presettings.

on page 623.

Chapter 3.2.1.7, "Switching the Instrument On and

Chapter 11.2.6, "Setting Up a Network (LAN)

Chapter 3.2.6, "Configuring the GPIB

Show Quick Links

Table of Contents