R&S ESR Series User Manual page 764

®
R&S ESR
Parameters:
<FileName>
Example:
Manual operation:
Controlling the Measurement
The following commands control the measurement itself.
INITiate<n>:ESPectrum
[SENSe:]SWEep:MODE
INITiate<n>:ESPectrum
This command starts a Spectrum Emission Mask measurement.
Suffix:
<n>
Example:
Manual operation:
[SENSe:]SWEep:MODE <Mode>
This command selects the spurious emission and spectrum emission mask measure-
ments.
Parameters:
<Mode>
Example:
Manual operation:
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
ESP:PRES:STOR
'WCDMA\3GPP\DL\PowerClass_31_39.xml'
Stores the settins in the PowerClass_31_39.xml file in the C:
\R_S\instr\sem_std\WCDMA\3GPP\DL directory.
See "Save As Standard"
.................................................................................................. 761
................................................................................................. 761
.
irrelevant
INIT:ESP
Starts a Spectrum Emission Mask measurement.
See "Meas Start/Stop"
AUTO | ESPectrum | LIST
AUTO
Switches to "Spectrum" measurement mode or stays in the cur-
rent mode if it is not ESP/LIST
ESPectrum
"Spectrum Emission Mask" measurement mode
LIST
"Spurious Emissions" measurement mode
*RST: AUTO
SWE:MODE ESP
Sets the Spectrum Emission Mask measurement mode.
See "Spectrum Emission Mask"
See "Spurious Emissions"
See "Spectrum Emission Mask"
See "Spurious Emissions"
on page 267
on page 267
on page 223
on page 224
on page 258
on page 289
Remote Control
761