R&S ESR Series User Manual page 218

®
R&S ESR
time range representation, negative times may also be entered. The allowed range
is -1000 s to +1000 s.
5.4.3.4 Working with Lines
If a line is switched on, the softkey is highlighted.
Switching a line on or off
1. Press the
2. Press the softkey for the required line, e.g.
An edit dialog box is opened to enter the position of the line. If the line was
switched off, it is switched on. If it was switched on, it remains switched on.
3. If another softkey is pressed, the edit dialog box for the line is closed, but the line
remains switched on (softkey with highlighted background).
4. When you press the
edit dialog box for the line is opened again.
5. When you press the
is switched off (softkey without highlighted background).
5.4.3.5 Selecting a Limit Line
●
To display the "Select Limit Line" dialog box, press the LINES key.
All limit lines saved in the default directory and all subdirectories are displayed. For
each limit line, the following information is given:
"Unit"
"Traces"
"Show"
"Compatible"
"Offset"
User Manual 1175.7068.02 ─ 12
Display Lines softkey.
Display Line 1 / Display Line 2
Display Line 1 / Display Line 2
unit of the y-axis
selected traces to check
limit line displayed in the measurement diagram or hidden
compatibility of the limit line to the current measurement settings
user-definable X- and Y-offset for the limit line
Common Analysis Functions
Display Line 1 / Display Line
softkey for the second time, the
softkey the third time, the line
Receiver Mode
2.
215