R&S ESR Series User Manual page 425

®
R&S ESR
Remote command:
CALC:MARK1:FUNC:NDBD:STAT ON, see
NDBDown:STATe
CALC:MARK1:FUNC:NDBD 3dB, see
NDBDown
CALC:MARK1:FUNC:NDBD:RES? , see
NDBDown:RESult?
CALC:MARK:FUNC:NDBD:QFAC?, see
NDBDown:QFACtor
CALC:MARK1:FUNC:NDBD:FREQ? (span > 0), see
FUNCtion:NDBDown:FREQuency?
CALC:MARK1:FUNC:NDBD:TIME? (span = 0), see
FUNCtion:NDBDown:TIME?
Marker Peak List
Opens the "Peak List" submenu to define criteria for the sort order and the contents of
the peak list. For each listed peak the frequency ("Stimulus") and level ("Response")
values are given. In addition, the peaks are indicated in the trace display. A maximum
of 50 entries are listed.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt?
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?
Peak List On/Off ← Marker Peak List
Activates/deactivates the marker peak list. If activated, the peak list is displayed and
the peaks are indicated in the trace display.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:STAT
Sort Mode Freq/Lvl ← Marker Peak List
Defines the criteria for sorting:
"Freq"
"Lvl"
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT
Max Peak Count ← Marker Peak List
Defines the maximum number of peaks to be determined and displayed.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:LIST:SIZE
User Manual 1175.7068.02 ─ 12
on page 878
on page 876
on page 877
on page 877
on page 878
sorting in ascending order of frequency values (span > 0) or time val-
ues (span = 0)
sorting in ascending order of the level
Spectrum Measurements
CALCulate<n>:MARKer<m>:FUNCtion:
CALCulate<n>:MARKer<m>:FUNCtion:
CALCulate<n>:MARKer<m>:FUNCtion:
CALCulate<n>:MARKer<m>:FUNCtion:
CALCulate<n>:MARKer<m>:
on page 876
CALCulate<n>:MARKer<m>:
on page 882
on page 883
on page 882
on page 882
Analysis
on page 880
on page 881
422