R&S ESR Series User Manual page 801

®
R&S ESR
CALCulate<n>:STATistics:SCALe:X:RLEVel <Value>
This command defines the reference level for the x-axis of the measurement diagram.
The setting is identical to the reference level setting using the
WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel
With the reference level offset <> 0 the indicated value range of the reference level is
modified by the offset.
The unit depends on the setting performed with CALCulate<n>:UNIT:POWer.
Suffix:
<n>
Parameters:
<Value>
Example:
Manual operation:
CALCulate<n>:STATistics:SCALe:Y:LOWer <Value>
This command defines the lower limit for the y-axis of the diagram in statistical mea-
surements. Since probabilities are specified on the y-axis, the entered numeric values
are dimensionless.
Suffix:
<n>
Parameters:
<Value>
Example:
Manual operation:
CALCulate<n>:STATistics:SCALe:Y:UNIT <Unit>
This command defines the scaling type of the y-axis.
Suffix:
<n>
Parameters:
<Unit>
Example:
Manual operation:
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
.
irrelevant
-120dBm to 20dBm
*RST: -20dBm
CALC:STAT:SCAL:X:RLEV -60dBm
See "x-Axis Ref Level"
.
selects the screen
1E-9 to 0.1
*RST: 1E-6
CALC:STAT:SCAL:Y:LOW 0.001
See "y-Axis Min Value"
.
selects the screen
PCT | ABS
*RST: ABS
CALC:STAT:SCAL:Y:UNIT PCT
Sets the percentage scale.
See "y-Unit % / Abs" on page 319
DISPlay[:
command.
on page 317
on page 319
Remote Control
798