R&S ESR Series User Manual page 870

®
R&S ESR
●
CALCulate<n>:DELTamarker<m>:X:RELative?
●
CALCulate<n>:DELTamarker<m>:Y
CALCulate<n>:DELTamarker<m>:MREF
CALCulate<n>:DELTamarker<m>:MREF <RefMarkerNo>
This command defines the reference marker for a delta marker other than marker 1.
The reference may be another marker or the fixed reference.
Suffix:
<n>
<m>
Parameters:
<RefMarkerNo>
Example:
Manual operation:
Controlling Fixed Reference Markers
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:MAXimum[:PEAK]
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:X
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:Y
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:Y:OFFSet
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed[:STATe]
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:MAXimum[:PEAK]
This command moves the fixed reference marker to the peak power.
When measuring the phase noise, the command defines a new reference point level
for delta marker 2.
Suffix:
<n>
<m>
Example:
Usage:
Manual operation:
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
on page 703
.......................................................................... 867
.
Selects the measurement window.
Selects the marker.
1 ... 16
Selects markers 1 to 16 as the reference.
FIXed
Selects the fixed reference as the reference.
CALC:DELT3:MREF 2
Specifies that the values of delta marker 3 are relative to marker
2.
See "Marker Wizard" on page 202
.
Selects the measurement window.
Selects the marker.
CALC:DELT:FUNC:FIX:RPO:MAX
Sets the reference point level for delta markers to the peak of
the selected trace.
Event
See "Peak Search" on page 418
Remote Control
on page 702
..................... 867
............................................. 868
............................................. 868
................................. 868
............................................... 869
867