R&S ESR Series User Manual page 918

®
R&S ESR
Parameters:
<Name>
Example:
Mode:
Manual operation:
11.8 Common Commands
Common commands are described in the IEEE 488.2 (IEC 625-2) standard. These
commands have the same effect and are employed in the same way on different devi-
ces. The headers of these commands consist of "*" followed by three letters. Many
common commands are related to the Status Reporting System.
Available common commands:
*CAL?
*CLS
*ESE
*ESR?
*IDN?
*IST?
*OPC
*OPT?
*PCB
*PRE
*PSC
*RST
*SRE
*STB?
*TRG
*TST?
*WAI
*CAL?
Calibration query
Initiates a calibration of the instrument and subsequently queries the calibration status.
Responses > 0 indicate errors.
Note: If you start a self-alignment remotely, then select the "Local" softkey while the
alignment is still running, the instrument only returns to the manual operation state
after the alignment is completed.
Usage:
Manual operation:
User Manual 1175.7068.02 ─ 12
Generator name | NONE
*RST:
SYST:COMM:RDEV:GEN2:TYPE 'SME02'
Selects SME02 as generator 2
A, NF
See
...........................................................................................................................915
.............................................................................................................................916
.............................................................................................................................916
...........................................................................................................................916
............................................................................................................................916
............................................................................................................................ 916
............................................................................................................................ 917
...........................................................................................................................917
............................................................................................................................ 917
............................................................................................................................ 917
............................................................................................................................ 917
.............................................................................................................................918
............................................................................................................................ 918
...........................................................................................................................918
............................................................................................................................ 918
........................................................................................................................... 918
............................................................................................................................. 919
Query only
See
NONE
"Type" on page 490
"Self Alignment" on page 511
Remote Control
Common Commands
915