R&S ESR Series User Manual page 223

®
R&S ESR
5.4.3.9 Activating/Deactivating a Limit Line
Prerequisites:
The x- and y-units of limit line and current measurement setting have to be compatible.
For details refer to
The limit line has to consist of 2 or more data points.
1. In the "Select Limit Line" dialog box, select the limit line you want to activate/deacti-
vate. For details see also
2. To activate or deactivate a limit line for a trace, press the
on page 210 softkey and select or deselect the trace(s) to which this limit line
applies.
3. To deactivate the limit line for all traces, press the
key.
User Manual 1175.7068.02 ─ 12
Chapter 5.4.3.3, "Limit Lines (Frequency/Time
Chapter 5.4.3.5, "Selecting a Limit
Receiver Mode
Common Analysis Functions
Lines)", on page 214.
Line", on page 215.
"Select Traces to check"
"Deselect All" on page 210 soft-
220