R&S ESR Series User Manual page 798

®
R&S ESR
Manual operation:
[SENSe:]SWEep:EGATe:TRACe<k>: PERiod <Value>
This command defines the length of the period to be traced using gated triggering.
Suffix:
<k>
Parameters:
<Value>
Example:
Manual operation:
[SENSe:]SWEep:EGATe:TRACe<k>:STARt<range> <Value>
This command defines the starting point for the range to be traced using gated trigger-
ing.
Suffix:
<k>
<range>
Parameters:
<Value>
Example:
Manual operation:
[SENSe:]SWEep:EGATe:TRACe<k>[:STATe<range>] <State>
This command activates or deactivates tracing for a specific range using gated trigger-
ing.
Suffix:
<k>
<range>
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
See "Gate Ranges" on page 320
.
1...6
trace
<numeric value>
*RST: 0 s
SWE:EGAT:TRAC1:PER 5ms
Defines the period for gated triggering to 5 ms.
See "Gate Ranges" on page 320
.
1...6
trace
1...3
range
<numeric value>
*RST: OFF
SWE:EGAT:TRAC1:STAR1 3ms
Sets the Starting point for range 1 on trace 1 at 3 ms.
See "Gate Ranges" on page 320
.
1...6
trace
1...3
range
Remote Control
795