R&S ESR Series User Manual page 705

®
R&S ESR
Parameters:
<TraceNumber>
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>:X <Position>
This command positions a delta marker on a particular coordinate on the x-axis.
The position is an absolute value.
You can enter a relative value, if you activate relative entry first with
DELTamarker<m>:MODE.
If fixed reference is active, the position is relative to the fixed reference
(CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed[:STATe]
always returns the absolute position.
Suffix:
<n>
<m>
Parameters:
<Position>
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>:X:RELative?
This command queries the x-value of the selected delta marker relative to marker 1 or
to the reference position (for CALC:DELT:FUNC:FIX:STAT ON). The command acti-
vates the corresponding delta marker, if necessary.
Suffix:
<n>
<m>
Example:
Usage:
User Manual 1175.7068.02 ─ 12
1 ... 6
Trace number the marker is positioned on.
CALC:DELT3:TRAC 2
Assigns delta marker 3 to trace 2.
See "Marker to Trace"
See "Marker Wizard" on page 202
See "Marker Configuration"
.
Selects the measurement window.
Selects the marker.
0 to maximum frequency or sweep time
CALC:DELT:X?
Outputs the absolute frequency/time of delta marker 1.
See "Marker 1 / Marker 2 / Marker 3 / ... Marker 16,/ Marker
Norm/Delta" on page 201
.
Selects the measurement window.
Selects the marker.
CALC:DELT3:X:REL?
Outputs the frequency of delta marker 3 relative to marker 1 or
relative to the reference position.
Query only
Remote Commands in Receiver Mode
on page 202
on page 303
Remote Control
CALCulate<n>:
is ON). A query
702