R&S ESR Series User Manual page 461

®
R&S ESR
7 I/Q Analyzer
The I/Q Analyzer provides functions to capture, visualize and evaluate I/Q data. These
functions include:
●
capturing data from the RF input
●
displaying I/Q data in various result types, e.g. separate Real/Imag diagrams or as
an I/Q-vector
Menu and softkey description
The "I/Q Analyzer" menu is displayed when you select the "I/Q Analyzer" softkey in the
[Mode] menu. The same menu is displayed when you press the [MEAS] or [MEAS
Config] keys in "I/Q Analyzer" mode. For details see
Parameters of the I/Q Analyzer
The "Amplitude" menu, which is displayed when you select the [AMPT] key, is descri-
bed in see
on page 464.
The "Input/Output" menu, which is displayed when you select the [INPUT/OUTPUT]
key, as well as the "Save/Recall" menu ([Save/Rcl] key) contain the same functions in
I/Q Analyzer mode as in "Spectrum" mode (see
ration – INPUT/OUTPUT
The "Marker" menu is identical to the one in Spectrum mode for display modes "Magni-
tude","Real/Imag" and "Spectrum" (except for "Marker Zoom"), see
on page 460. For the other display modes this menu is not available.
The "Marker To" menu is identical to the one in Spectrum mode. For the "I/Q" display
mode, an additional function is available, see
Menu in I/Q Analyzer
The "Trace" menu is identical to the one in Spectrum mode, except in "I/Q Vector" dis-
play mode. In this case, only 1 trace is available and no detector can be selected (see
Chapter 6.3.1.1, "Softkeys of the Trace
The "Trigger" menu, which is displayed when you select the [TRIG] key, is described in
see Chapter 7.4, "Softkeys of the Trigger Menu in I/Q Analyzer
The "Span", "BW", and "Lines" menus are not available in this mode. All other menus
are identical to those described for "Spectrum" mode (see
on page 342 and
Remote Control
Measurements with the I/Q Analyzer can also be performed via remote control.
For more information see
on page 887.
User Manual 1175.7068.02 ─ 12
Menu",
Chapter 7.2, "Softkeys of the Amplitude Menu in I/Q Analyzer
Key", on page 383).
Mode", on page 469.
Chapter 6.3, "Analysis",
Chapter 11.6, "Remote Commands in I/Q Analyzer
Chapter 7.1, "Softkeys and
on page 459.
Chapter 6.2.9, "Input/Output Configu-
Chapter 7.3, "Softkeys of the Marker To
Menu", on page 388).
Chapter 6.2,
on page 387.
I/Q Analyzer
Mode",
"Display Config"
Mode", on page 469.
"Configuration",
Mode",
458