R&S ESR Series User Manual page 978

®
R&S ESR
Example:
Manual operation:
HCOPy:TREPort:TEST:REMove:SELected
This command deletes all selected datasets that are currently part of a test report.
Example:
Usage:
Manual operation:
11.13.2.3 Selecting Datasets for the Report
HCOPy:TREPort:TEST:SELect
HCOPy:TREPort:TEST:SELect:ALL
HCOPy:TREPort:TEST:SELect:INVert
HCOPy:TREPort:TEST:SELect:NONE
HCOPy:TREPort:TEST:SELect <Dataset>, <State>
This command includes or excludes datasets from the test report.
Parameters:
<Dataset>
<State>
Example:
Manual operation:
HCOPy:TREPort:TEST:SELect:ALL
This command includes all available datasets in a test report.
Example:
Usage:
User Manual 1175.7068.02 ─ 12
HCOP:TREP:TEST:REM 2
Deletes the second dataset from the current test report.
See "Adding and Removing Datasets"
HCOP:TREP:TEST:SEL:NONE
Deselects all datasets.
HCOP:TREP:TEST:SEL 2,ON
HCOP:TREP:TEST:SEL 3,ON
Selects the second and third datasets.
HCOP:TREP:TEST:REM:SEL
Deletes the selected datasets (the second and third).
Event
See "Adding and Removing Datasets"
........................................................................................975
................................................................................. 975
..............................................................................976
..............................................................................976
Index number of the dataset as shown in the "Test Report Con-
tent Selection" dialog box.
If the index number is greater than the number of available data-
sets, the command does nothing.
ON | OFF
HCOP:TREP:TEST:SEL 2, OFF
Excludes the second dataset from the test report.
See "Selecting Datasets for the Report"
HCOP:TREP:TEST:SEL:ALL
Includes all available datasets in the test report.
Event
Remote Control
Working with Test Reports
on page 551
on page 551
on page 551
975