R&S ESR Series User Manual page 970

®
R&S ESR
Manual operation:
Table 11-27: Available <items> in receiver application
<Item>
DIAGram
FRESults
HEADer
IF
IFSPectrogram
MARKers
PAGecount
PRESults
SCANtable
SETTings
SPECtrogram
SRESults
TDSTamp
TRANsducer
Table 11-28: Available <items> in spectrum application
<Item>
DIAGram
HEADer
PAGecount
RESultlist
SETTings
SPECtrogram
TDSTamp
TRANsducer
Table 11-29: Available <items> in I/Q analyzer
<Item>
DIAGram
HEADer
PAGecount
User Manual 1175.7068.02 ─ 12
See "Selecting the Test Report Contents"
Description
Screenshot of the scan results.
Numerical results for the final measurement.
Header made up of several lines of information that is (by
default) displayed on each page of the test report.
Screenshot of the results for IF analysis.
Screenshot of the IF spectrogram.
Contents of the marker table.
Page numbers.
Contents of the peak list.
Measurement configuration as defined in the scan table.
Settings that have been used during a measurement.
Screenshot of the spectrogram.
Numerical results for the scan.
Date and time of the measurement.
Characteristics of the transducer.
Description
Screenshot of the scan results.
Header made up of several lines of information that is (by
default) displayed on each page of the test report.
Page numbers.
Numerical measurement results.
Settings that have been used during a measurement.
Screenshot of the spectrogram.
Date and time of the measurement.
Characteristics of the transducer.
Description
Screenshot of the result diagram.
Header made up of several lines of information that is (by
default) displayed on each page of the test report.
Page numbers.
Remote Control
Working with Test Reports
on page 546
Default
x
x
x
x
x
x
x
Default
x
x
x
x
x
Default
x
x
x
967