R&S ESR Series User Manual page 506

®
R&S ESR
The instrument switches from remote to manual operation, but only if the local lock-
out function has not been activated in the remote control mode.
9.2 User-Defined Menu – USER key
The USER key displays a user-defined menu. The softkeys displayed here can be
labelled and assigned to user-defined settings files as required.
To open the user-defined menu
► Press the USER key.
The "User" menu is displayed.
Softkeys of the "User" menu
The "User" menu contains 8 user-definable softkeys as well as a
Setup" softkey
keys has the same effect as the
tings file. The definitions for these softkeys remain unchanged even after a reset func-
tion and after updating the firmware.
As opposed to recalling a settings file via the "Save/Recall" menu, when a saved set-
tings file is loaded using one of the user-definable softkeys, the only item to be loaded
is the current (measurement) settings - no trace settings, transducer or limit line config-
urations etc.
"User Preference Setup" softkey
Opens an "ApplicationManager" dialog to set up the user-defined softkeys.
User Manual 1175.7068.02 ─ 12
that allows you to define them. Pressing one of the user-definable soft-
Save File / Recall File
System Configuration
User-Defined Menu – USER key
"User Preference
function for a pre-defined set-
503