R&S ESR Series User Manual page 671

®
R&S ESR
DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing <ScalingType>
This command selects the scaling of the y-axis.
Suffix:
<n>
<t>
Parameters:
<ScalingType>
Example:
Manual operation:
INPut:ATTenuation <Attenuation>
This command defines the attenuation level at the RF input.
To protect the input mixer, attenuation levels of 10 dB or less are possible only if you
have turned the input protection off with
STATe].
Parameters:
<Attenuation>
Example:
Manual operation:
INPut:ATTenuation:AUTO <State>
This command turns automatic configuration of the attenuation on and off.
User Manual 1175.7068.02 ─ 12
.
Selects the measurement window.
irrelevant
LOGarithmic
Logarithmic scaling.
LINear
Linear scaling in %.
LDB
Linear scaling in dB.
*RST: LOGarithmic
DISP:TRAC:Y:SPAC LIN
Select a linear scale.
See "Range Log 100 dB"
See "Range Log 50 dB"
See "Range Log 10 dB"
See "Range Log 5 dB"
See "Range Log 1 dB"
See "Range Log Manual"
See "Range Linear %"
See "Range Lin. Unit"
INPut:ATTenuation:PROTection[:
Range: 0 dB to 75 dB
Increment: 5 dB
*RST: 10 dB
INP:ATT 40dB
Defines an attenuation level of 40 dB.
See "RF Atten Manual"
Remote Commands in Receiver Mode
on page 317
on page 317
on page 318
on page 318
on page 318
on page 318
on page 318
on page 319
on page 181
Remote Control
668