R&S ESR Series User Manual page 707

®
R&S ESR
CALCulate<n>:DLINe<k> <Position>
This command defines the (vertical) position of a display line.
Suffix:
<n>
<k>
Parameters:
<Position>
Example:
Manual operation:
CALCulate<n>:DLINe<k>:STATe <State>
This command turns a display line on and off.
Suffix:
<n>
<k>
Parameters:
<State>
Example:
Manual operation:
11.4.8.2 Using Frequency Lines
CALCulate<n>:FLINe<k>
CALCulate<n>:FLINe<k>:STATe
CALCulate:TFLine:STATe
CALCulate<n>:FLINe<k> <Frequency>
This command defines the position of a frequency line.
Suffix:
<n>
<k>
User Manual 1175.7068.02 ─ 12
.
Selects the measurement window.
1 | 2
Selects the display line.
The value range is variable.
The unit depends on CALCulate<n>:UNIT:POWer.
*RST: (state is OFF)
CALC:DLIN -20dBm
See "Display Line 1 / Display Line 2"
.
Selects the measurement window.
1 | 2
Selects the display line.
ON | OFF
*RST: OFF
CALC:DLIN2:STAT OFF
See "Display Line 1 / Display Line 2"
................................................................................................704
......................................................................................705
............................................................................................... 705
.
Selects the measurement window.
1 | 2
Selects the frequency line.
Remote Control
Remote Commands in Receiver Mode
on page 212
on page 212
704