R&S ESR Series User Manual page 205

®
R&S ESR
CALCulate<n>:MARKer<m>:Y
CALCulate<n>:DELTamarker<m>[:STATe]
CALCulate<n>:DELTamarker<m>:X
CALCulate<n>:DELTamarker<m>:X:RELative?
CALCulate<n>:DELTamarker<m>:Y
More Markers
Opens a sub-menu to select one of up to 16 available markers. See
2 / Marker 3 / ... Marker 16,/ Marker Norm/Delta"
Marker to Trace
Opens an edit dialog box to enter the number of the trace on which the marker is to be
placed.
Remote command:
CALCulate<n>:MARKer<m>:TRACe
CALCulate<n>:DELTamarker<m>:TRACe
Marker Wizard
Opens a configuration dialog for markers. The marker wizard allows you to configure
and activate up to 16 different markers in one dialog. The first 8 markers are displayed
on one tab, the last 8 markers on a second tab. For each marker, the following settings
are available:
"Selected/
State"
"Normal/Delta"
User Manual 1175.7068.02 ─ 12
on page 696
on page 695
When you press the "Selected" or "State" field the corresponding
marker is activated and the marker row is highlighted.
Defines whether it is a normal marker or delta marker. For delta mark-
ers you can define a reference marker.
Common Analysis Functions
on page 701
on page 702
on page 702
on page 703
on page 201.
on page 701
Receiver Mode
"Marker 1 / Marker
202