R&S ESR Series User Manual page 989

®
R&S ESR
Example:
Manual operation:
MMEMory:SELect[:ITEM]:NONE
This command excludes all items from the settings file to be stored/loaded.
Example:
Usage:
Manual operation:
MMEMory:SEL[:ITEM]:SGRam <State>
This command includes or excludes spectrogram data when storing or restoring a con-
figuration file.
Parameters:
<State>
Example:
MMEMory:SELect[:ITEM]:TRACe[:ACTive] <State>
This command includes the active traces in the settings file to be stored/loaded. Active
traces are all traces whose state is not blank.
Parameters:
<State>
Example:
Manual operation:
MMEMory:SELect[:ITEM]:TRANsducer:ALL <State>
This command includes all transducer factors and sets in the settings file to be stored/
loaded.
Parameters:
<State>
Example:
Manual operation:
User Manual 1175.7068.02 ─ 12
MMEM:SEL:LIN:ALL ON
See "Select Items" on page 531
MMEM:SEL:NONE
Event
See "Disable all Items"
ON | OFF
MMEM:SEL:SGR ON
Adds spectrogram data to the configuration file.
ON | OFF
*RST: OFF, i.e. no traces is stored
MMEM:SEL:TRAC ON
See "Select Items" on page 531
ON | OFF
*RST: OFF
MMEM:SEL:TRAN:ALL ON
See "Select Items" on page 531
Display Configuration
on page 532
Remote Control
986