R&S ESR Series User Manual page 802

®
R&S ESR
CALCulate<n>:STATistics:SCALe:Y:UPPer <Value>
This command defines the upper limit for the y-axis of the diagram in statistical mea-
surements. Since probabilities are specified on the y-axis, the entered numeric values
are dimensionless.
Suffix:
<n>
Parameters:
<Value>
Example:
Manual operation:
11.5.1.12 Measuring in the Time Domain
The following commands configure and perform time domain power measurements.
Configuring the Measurement
The following commands control measurement configurations for measurements of the
time domain power
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:AOFF
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:AVERage
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MODE
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PHOLd
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:REFerence:AUTO ONCE
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:AOFF
This command turns all time domain power measurements off.
Suffix:
<n>
<m>
Example:
Usage:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:AVERage <State>
This command turns averaging for the active power measurement in zero span on and
off.
Averaging is reset by switching it off and on again.
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
.
irrelevant
1E-8 to 1.0
*RST: 1.0
CALC:STAT:SCAL:Y:UPP 0.01
See "y-Axis Max Value"
.
Selects the measurement window.
Selects the marker.
CALC:MARK:FUNC:SUMM:AOFF
Switches off the functions for power measurement in zero span.
Event
Remote Control
on page 319
................................................... 799
.............................................. 799
.................................................. 800
................................................. 800
........................801
................................................. 801
799