R&S ESR Series User Manual page 299

Emi test receiver
Table of Contents

Advertisement

®
R&S
ESR
Time Domain Power
Activates the power measurement in zero span and opens a submenu to configure the
power measurement. For more details see also
in Zero
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary[:STATe]
Peak ← Time Domain Power
Activates the calculation of the peak value from the points of the displayed trace or a
segment thereof.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PPEak[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PPEak:RESult?
RMS ← Time Domain Power
Activates the calculation of the RMS value from the points of the displayed trace or a
segment thereof.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:RMS[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:RMS:RESult?
Mean ← Time Domain Power
Activates the calculation of the mean value from the points of the displayed trace or a
segment thereof. The linear mean value of the equivalent voltages is calculated.
This can be used for instance to measure the mean power during a GSM burst.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN:RESult?
Std Dev ← Time Domain Power
Activates the calculation of the standard deviation of measurement points from the
mean value and displays them as measured value. The measurement of the mean
power is automatically switched on at the same time.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:SDEViation[:STATe]
on page 810
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:SDEViation:RESult?
on page 810
Limits (On/Off) ← Time Domain Power
Switches the limitation of the evaluation range on or off. Default setting is off.
If switched off, the evaluation range is not limited. If switched on, the evaluation range
is defined by the left and right limit. If only one limit is set, it corresponds to the left limit
and the right limit is defined by the stop frequency. If the second limit is also set, it
defines the right limit.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
User Manual 1175.7068.02 ─ 12
Span",
on page 294.
Spectrum Measurements
Chapter 6.1.1.7, "Measuring the Power
on page 801
on page 808
on page 808
on page 690
Measurements
on page 806
on page 805
on page 804
on page 803
296

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents