R&S ESR Series User Manual page 888

®
R&S ESR
Return values:
<Power>
Example:
Usage:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:SPAN <Span>
This command defines the bandwidth around the marker position.
Suffix:
<n>
<m>
Parameters:
<Span>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer[:STATe] <State>
This command turns markers for band power measurements on and off.
If necessary, the command also turns on a marker. If a marker is already on, the cur-
rently active marker is used as the band power marker (all other marker functions for
this marker are deactivated).
For details see
Suffix:
<n>
<m>
Parameters:
<State>
User Manual 1175.7068.02 ─ 12
Remote Commands in Spectrum Analyzer Mode
Signal power over the marker bandwidth.
Activate the band power marker:
CALC:MARK:FUNC:BPOW:STAT ON
Select the density mode for the result:
CALC:MARK:FUNC:BPOW:MODE DENS
Query the result:
CALC:MARK:FUNC:BPOW:RES?
Response:
20dBm/Hz
Query only
See "Power" on page 424
See "Density" on page 425
.
irrelevant
irrelevant
Numeric value that defines the span in Hz.
The maximum span depends on the marker position and
R&S FSV model.
*RST: 5% of current span
CALC:MARK:FUNC:BPOW:SPAN 20
See "Span" on page 424
"Performing Band Power Measurements"
.
irrelevant
irrelevant
ON | OFF
*RST: OFF
Remote Control
on page 428.
885