R&S ESR Series User Manual page 694

®
R&S ESR
Parameters:
<State>
Example:
Manual operation:
11.4.7.2 Using Markers
CALCulate<n>:MARKer<m>:AOFF
CALCulate<n>:MARKer<m>:MAXimum:LEFT
CALCulate<n>:MARKer<m>:MAXimum:NEXT
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]
CALCulate<n>:MARKer<m>:MAXimum:RIGHt
CALCulate<n>:MARKer<m>:MINimum:LEFT
CALCulate<n>:MARKer<m>:MINimum:NEXT
CALCulate<n>:MARKer<m>:MINimum[:PEAK]
CALCulate<n>:MARKer<m>:MINimum:RIGHt
CALCulate<n>:MARKer<m>[:STATe]
CALCulate<n>:MARKer<m>:TRACe
CALCulate<n>:MARKer<m>:X
CALCulate<n>:MARKer<m>:Y
CALCulate<n>:MARKer<m>:AOFF
This command all markers off, including delta markers and marker measurement func-
tions.
Suffix:
<n>
<m>
Example:
Usage:
Manual operation:
CALCulate<n>:MARKer<m>:MAXimum:LEFT
This command positions a marker to the next smaller trace maximum on the left of the
current position (i.e. in descending X values).
If no next smaller maximum value is found on the trace (level spacing to adjacent val-
ues < peak excursion), an execution error (error code: -200) is produced.
User Manual 1175.7068.02 ─ 12
ON | OFF
*RST: ON
DISP:MINF:STAT ON
Turns the marker info field on.
See "Marker Info (On Off)"
..................................................................................691
...................................................................691
.................................................................. 692
................................................................ 692
..................................................................693
....................................................................693
................................................................... 693
................................................................. 694
...................................................................694
............................................................................... 695
................................................................................695
........................................................................................ 695
........................................................................................ 696
.
Selects the measurement window.
depends on mode
irrelevant
CALC:MARK:AOFF
Switches off all markers.
Event
See "All Marker Off" on page 203
See "Marker Configuration"
Remote Control
Remote Commands in Receiver Mode
on page 203
on page 303
691