R&S ESR Series User Manual page 632

®
R&S ESR
The default instrument name is a non-case-sensitive string with the following syntax:
<Type><variant>-<serial_number>
The serial number can be found on the rear panel of the instrument. It is the third part
of the device ID printed on the bar code sticker:
To change the computer name
1. Press the [Setup] key and select "General setup" > "Computer name".
The current computer name is displayed here.
2. Enter the new computer name.
3. Confirm the entry.
11.2.6.4 Changing the Windows Firewall Settings
A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. Rohde & Schwarz highly recommends the use of the firewall on
your instrument. Rohde & Schwarz instruments are shipped with the Windows firewall
enabled and preconfigured in such a way that all ports and connections for remote
control are enabled.
For more details on firewall configuration, see the following Rohde & Schwarz White
Paper:
●
1EF96: Malware Protection Windows 10
Note that changing firewall settings requires administrator rights.
11.2.7 How to Configure the LAN Using the LXI Web Browser Interface
The instrument's LXI browser interface works correctly with all W3C compliant brows-
ers.
► In the web browser, open the http://<instrument-hostname> or http://
<instrument-ip-address> page, e.g. http://10.113.10.203.
The default password to change LAN configurations is LxiWebIfc.
The "Instrument Home Page" (welcome page) opens.
User Manual 1175.7068.02 ─ 12
Remote Control
Controlling the R&S ESR Remotely
629