R&S ESR Series User Manual page 326

®
R&S ESR
Remote command:
CALCulate<n>:STATistics:NSAMples
Scaling ← CCDF
Opens a submenu to change the scaling parameters of x- and y-axis.
x-Axis Ref Level ← Scaling ← CCDF
Opens an edit dialog box to enter the reference level in the currently active unit (dBm,
dBµV, etc). The function of this softkey is identical to the "Ref Level" softkey in the
"Amplitude" menu (see
For the APD function this value is mapped to the right diagram border. For the CCDF
function there is no direct representation of this value on the diagram as the x-axis is
scaled relatively to the measured mean power.
Remote command:
CALCulate<n>:STATistics:SCALe:X:RLEVel
x-Axis Range ← Scaling ← CCDF
Opens the "Range" submenu to select a value for the level range to be covered by the
statistics measurement selected.
Remote command:
CALCulate<n>:STATistics:SCALe:X:RANGe
Range Log 100 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 100 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISP:WIND:TRAC:Y 100DB, see
on page 844
Range Log 50 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 50 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISP:WIND:TRAC:Y 50DB, see
on page 844
Range Log 10 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 10 dB.
User Manual 1175.7068.02 ─ 12
"Ref Level"
on page 668
on page 668
on page 793
on page 352).
on page 798
on page 797
DISPlay[:WINDow<n>]:TRACe<t>:Y:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
DISPlay[:WINDow<n>]:TRACe<t>:Y:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
Spectrum Measurements
Measurements
323