R&S ESR Series User Manual page 953

®
R&S ESR
Managing a transducer set
//Select or create a transducer set
CORR:TSET:SEL 'Transducer Set'
//Define a comment for the transducer set
CORR:TSET:COMM 'Transducer set example'
//Define a unit for the transducer set
CORR:TSET:UNIT 'DB'
//Turn the transducer break on
CORR:TSET:BRE ON
//Define the first transducer range
CORR:TSET:RANG1 150KHZ,1MHZ,'Transducer 1','Transducer 3'
CORR:TSET:RANG2 1MHZ,10MHZ,'Transducer 3','Transducer 4'
CORR:TSET:RANG3 10MHZ,30MHZ,'Transducer 3'
//Turn on the transducer set
CORR:TSET ON
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe]
[SENSe:]CORRection:TRANsducer:ACTive?
[SENSe:]CORRection:TRANsducer:CATalog?
[SENSe:]CORRection:TRANsducer:COMMent
[SENSe:]CORRection:TRANsducer:DATA
[SENSe:]CORRection:TRANsducer:DELete
[SENSe:]CORRection:TRANsducer:SCALing
[SENSe:]CORRection:TRANsducer:SELect
[SENSe:]CORRection:TRANsducer[:STATe]
[SENSe:]CORRection:TRANsducer:UNIT
[SENSe:]CORRection:TRANsducer:VIEW
[SENSe:]CORRection:TSET:BREak
[SENSe:]CORRection:TSET:CATalog?
[SENSe:]CORRection:TSET:COMMent
[SENSe:]CORRection:TSET:DELete
[SENSe:]CORRection:TSET:RANGe<range>
[SENSe:]CORRection:TSET:SELect
[SENSe:]CORRection:TSET[:STATe]
[SENSe:]CORRection:TSET:UNIT
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe] <State>
This command turns automatic adjustment of the reference level regarding the trans-
ducer factor characteristics on and off.
Before you can use the command, you have to select a transducer factor with
[SENSe:]CORRection:TRANsducer:SELect.
Parameters:
<State>
User Manual 1175.7068.02 ─ 12
.................................................................... 951
...................................................................951
..................................................................951
........................................................................ 952
......................................................................952
....................................................................952
...................................................................... 953
..................................................................... 953
.........................................................................953
........................................................................ 954
................................................................................. 954
............................................................................. 954
............................................................................ 955
................................................................................ 955
....................................................................955
.................................................................................956
................................................................................956
................................................................................... 956
ON
Automatically adjusts the reference level with respect to the
transducer factor characteristics.
OFF
Manual adjustment of the reference level with respect to the
transducer factor characteristics is necessary.
Remote Control
Using Transducers
.............................................. 950
950