R&S ESR Series User Manual page 987

®
R&S ESR
Manual operation:
DISPlay[:WINDow<n>]:TIME:FORMat <Format>
This command selects the time and date display format.
Suffix:
<n>
Parameters:
<Format>
Example:
Manual operation:
INITiate<n>:DISPlay <State>
This command turns the display during a single sweep measurement on or off.
Suffix:
<n>
Parameters:
<State>
Example:
11.14.2 Selecting Items to Store and Restore
MMEMory:SELect[:ITEM]:ALL
MMEMory:SELect[:ITEM]:DEFault
MMEMory:SELect[:ITEM]:HWSettings
MMEMory:SELect[:ITEM]:LINes:ALL
MMEMory:SELect[:ITEM]:NONE
MMEMory:SEL[:ITEM]:SGRam
MMEMory:SELect[:ITEM]:TRACe[:ACTive]
MMEMory:SELect[:ITEM]:TRANsducer:ALL
MMEMory:USER<Softkey>
User Manual 1175.7068.02 ─ 12
See "Screen Title (On/Off)"
See "Time+Date (On/Off)"
.
irrelevant
US | DE
*RST: DE
DISP:TIME ON
Switches the screen display of date and time on.
DISP:TIME:FORM US
Switches the date and time format to US.
See "Time+Date Format (US/DE)"
.
irrelevant
ON | OFF
*RST: ON
INIT:CONT OFF
Switches to single sweep mode
INIT:DISP OFF
Sets the display behavior to OFF
INIT;*WAI
Starts the measurement with display switched off.
......................................................................................... 985
................................................................................... 985
..............................................................................985
................................................................................985
..................................................................................... 986
........................................................................................986
....................................................................... 986
......................................................................986
............................................................................................. 987
Remote Control
Display Configuration
on page 520
on page 520
on page 520
984