Subaru Legacy 2002 Service Manual page 2013

Differentials
9) Temporarily tighten rear crossmember self-
locking nuts.
10) Remove band from rear differential. Raise rear
differential just enough to move transmission jack
away from it.
11) Install rear differential front member.
Tightening torque:
T1: 65 N·m (6.6 kgf-m, 48 ft-lb)
T2: 110 N·m (11.2 kgf-m, 81 ft-lb)
12) Tighten self-locking nuts.
Tightening torque:
70 N·m (7.1 kgf-m, 51 ft-lb)
REAR DIFFERENTIAL FOR VA-TYPE
B3M1613
B3M1639C
B3M1613
DI-44
13) Tighten protector nut.
Tightening torque:
65 N·m (6.6 kgf-m, 48.0 ft-lb)
14) Take down transmission jack.
15) Install propeller shaft.
<Ref. to DS-14, INSTALLATION, Propeller Shaft.>
16) Install heat shield cover.
17) Install rear exhaust pipe and muffler.
B3M1642