Subaru Legacy 2002 Service Manual page 2235

Hide thumbs Also See for Legacy 2002:

Table of Contents

TILT STEERING COLUMN

Power Assisted System (Power Steering)

C: DISASSEMBLY

Remove the two screws securing upper steering

column covers, and the two screws securing com-

bination switch, then remove related parts.

1) Insert combination switch to upper column

shaft, and install upper column cover. Then route

ignition key harness and combination switch har-

ness between column cover mounting bosses.

Tightening torque:

1.2 N·m (0.12 kgf-m, 0.9 ft-lb)

Don't overtorque screw.

Chapters

Table of Contents