Reverse Check Sleeve - Subaru Legacy 2002 Service Manual

13. Reverse Check Sleeve

A: REMOVAL
S503267A18
1) Remove the manual transmission assembly
from vehicle. <Ref. to MT-31, REMOVAL, Manual
Transmission Assembly.>
2) Remove the transfer case with extension case
assembly. <Ref. to MT-44, REMOVAL, Transfer
Case and Extension Case Assembly.>
3) Remove shifter arm.
4) Remove plug, spring washer and reverse check
ball.
5) Remove the reverse check sleeve.
B: INSTALLATION
1) Install the reverse check sleeve.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
REVERSE CHECK SLEEVE
S503267
B3M1376
B3M1377
S503267A11
B3M1377
MT-53
Manual Transmission and Differential
2) Install ball, spring, washer and plug to transfer
case.
Tightening torque:
10 N·m (1.0 kgf-m, 7.2 ft-lb)
3) Install the shifter arm to transfer case assembly.
4) Install the transfer case with extension case
assembly. <Ref. to MT-44, INSTALLATION, Trans-
fer Case and Extension Case Assembly.>
5) Install the manual transmission assembly to
vehicle. <Ref. to MT-33, INSTALLATION, Manual
Transmission Assembly.>
C: DISASSEMBLY
1) Cover the reverse check sleeve with a rag, and
remove snap ring using a screwdriver.
NOTE:
Replace snap ring with a new one if deformed or
weakened.
(A) Snap ring
B3M1376
S503267A06
B3M1383C