Subaru Legacy 2002 Service Manual page 2275

Power Assisted System (Power Steering)
RHD model (Except 3.0 L)
6) Disconnect pipe C·D.
LHD model
Disconnect pipe C·D from pipe (on the gearbox
side).
CAUTION:
¼ When disconnecting pipe C·D, use two
wrenches to prevent deformities.
¼ Be careful to keep pipe connections free
from foreign matter.
(1) Pipe C
(2) Pipe D
PIPE ASSEMBLY
RHD model
Remove flare nuts from control valve of gearbox
assembly, and then disconnect pipe.
CAUTION:
¼ When
wrenches to prevent deformities.
¼ Be careful to keep pipe connections free
from foreign matter.
7) Lower the vehicle.
8) Remove intake duct.
B4M2509A
9) Remove bolt A.
Except 3.0 L model
Disconnect pipe C from oil pump. Disconnect pipe
D from return hose.
CAUTION:
¼ Do not allow fluid from the hose end to come
into contact with pulley belt.
¼ To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
B4M1696B
(1)
(2)
(3)
PS-66
disconnecting pipes,
Bolt A
Pipe C
Pipe D
use two
B4M1657
B4M1658B