Vdc Control Module (Vdccm) - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

2. VDC Control Module

1) Disconnect battery ground cable.

2) Remove lower cover of instrument panel and

disconnect connectors on the back side of the

3) Remove three bolts which secure the fuse box

onto body side, then move the fuse box aside.

VDC CONTROL MODULE (VDCCM)

4) Remove two bolts which install VDCCM onto

body side bracket.

5) Disconnect connector from VDCCM by pulling

up the securing holder.

6) Remove VDCCM.

Table of Contents