Front Strut - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

5. Front Strut

1) Set vehicle on a lift.

2) Disconnect ground cable from battery.

3) Lift-up the vehicle and remove the wheel.

4) Remove bolt securing brake hose to strut.

5) Scribe an alignment mark on the camber

adjusting bolt which secures strut to housing.

6) Remove bolt securing the ABS sensor harness.

7) Remove two bolts securing housing to strut.

While holding head of adjusting bolt, loosen

self-locking nut.

8) Remove the three nuts securing strut mount to

Front Suspension

Table of Contents