Subaru Legacy 2002 Service Manual page 2220

Hide thumbs Also See for Legacy 2002:

Table of Contents

GENERAL DESCRIPTION

Power Assisted System (Power Steering)

¼ This section includes Airbag related repair

works. For those corresponding to the repair

procedures, read carefully CAUTION items in AB

section before working and be sure to follow the

instructions.

¼ Wear working clothing, including a cap, protec-

tive goggles, and protective shoes during opera-

¼ Remove contamination including dirt and corro-

sion before removal, installation or disassembly.

¼ Keep the disassembled parts in order and pro-

tect them from dust or dirt.

¼ Before removal, installation or disassembly, be

sure to clarify the failure. Avoid unnecessary

removal, installation, disassembly and replace-

¼ Be careful not to burn your hands, because each

part on the vehicle is hot after running.

¼ Use SUBARU genuine steering fluid, grease

etc. or the equivalent. Do not mix steering fluid,

grease etc. with that of another grade or from other

manufacturers.

¼ Be sure to tighten fasteners including bolts and

nuts to the specified torque.

¼ Place shop jacks or safety stands at the speci-

fied points.

¼ Apply steering fluid onto sliding or revolution

surfaces before installation.

¼ Before installing O-rings or snap rings, apply

sufficient amount of steering fluid to avoid damage

and deformation.

¼ Before securing a part on a vise, place cushion-

ing material such as wood blocks, aluminum plate,

or shop cloth between the part and the vise.

Chapters

Table of Contents