Subaru Legacy 2002 Service Manual page 1601

Automatic Transmission
C: REMOVAL
S502243A18
1) Set up the vehicle on a lift.
2) Move select lever to neutral position.
3) Remove air cleaner case or air intake chamber.
Except 3.0 L model
<Ref. to IN-6, REMOVAL, Air Cleaner Case.>
3.0 L model
<Ref. to IN(H6)-6, REMOVAL, Air Intake Cham-
ber.>
4) Disconnect inhibitor switch connector.
(A) Inhibitor switch
5) Remove inhibitor switch connector from stay.
6) Lift-up the vehicle.
7) Remove front and center exhaust pipes.
Except 3.0 L model
<Ref. to EX(w/oOBD)-9,
Exhaust Pipe.> or <Ref. to EX-5, REMOVAL, Front
Exhaust Pipe.>
3.0 L model
<Ref. to EX(H6)-5, REMOVAL, Front Exhaust
Pipe.>
8) Remove snap pin from range select lever.
(A) Snap pin
(B) Select cable
(C) Range select lever
INHIBITOR SWITCH
B3M1028B
REMOVAL, Front
B3M1029C
AT-30
9) Remove plate assembly from transmission
case.
(A) Select cable
(B) Plate ASSY
10) Remove bolts.
(A) Inhibitor switch
11) Move range select lever to parking position
(left side).
(A) Range select lever
B3M1030H
B3M1031B
B3M1032B