Parking Brake Cable - Subaru Legacy 2002 Service Manual

3. Parking Brake Cable

A: REMOVAL
S404170A18
1) Lift-up vehicle.
2) Remove rear tires and wheels.
3) Remove rear seat cushion. <Ref. to SE-17,
Rear Seat.>
4) Remove console
REMOVAL, Console Box.>
5) Loosen parking cable adjusting nut and console
bracket.
6) Remove parking brake lever.
7) Unbend parking brake lever pawls and remove
cable.
(1) Parking brake lever
(2) Cable
8) Roll up floor mat and remove clamps.
9) Remove equalizer cover.
PARKING BRAKE CABLE
S404170
box. <Ref. to EI-34,
B4M1777
S4M0471A
B4M1778
10) Remove inner cable end from equalizer.
(1) Equalizer
(2) Inner cable end
11) Pull out parking brake cable from rear brake.
<Ref. to PB-7, REMOVAL, Parking Brake Assem-
bly.>
12) Pull out clamp from rear brake.
13) Remove bolt and bracket from trailing link
bracket.
14) Remove bolt and clamp from rear floor.
15) Detach grommet from rear floor.
16) Remove cable assembly from cabin by forc-
ibly pulling it backward.
17) Detach parking brake cable from cable guide
at rear trailing link.
PB-5
Parking Brake
S4M0473A
B2M3185