Subaru Legacy 2002 Service Manual page 1564

7) Install heat shield cover.
8) Install rear exhaust pipe and muffler.
Except 3.0 L model
<Ref. to EX(w/oOBD)-13, INSTALLATION, Rear
Exhaust Pipe.> and <Ref. to EX(w/oOBD)-14,
INSTALLATION, Muffler.> or <Ref. to EX-9,
INSTALLATION, Rear Exhaust Pipe.> and <Ref. to
EX-10, INSTALLATION, Muffler.>
3.0 L model
<Ref. to EX(H6)-6, INSTALLATION, Front Exhaust
Pipe.> and <Ref. to EX(H6)-8, INSTALLATION,
Rear Exhaust Pipe.> and <Ref. to EX(H6)-9,
INSTALLATION, Muffler.>
9) Mount boot plate to body.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
10) Install console
INSTALLATION, Console Box.>
MT GEAR SHIFT LEVER
B3M1605
B3M1822
box. <Ref. to EI-34,
C: DISASSEMBLY
1) Disassemble lock wire.
(A) Lock wire
(B) Stay
2) Remove rod from lever.
(A) Rod
(B) Lever
(C) Stay
3) Remove snap ring from bushing B, then discon-
nect stay.
(A) Snap ring
(B) Bushing B
(C) Boot
4) Remove boot from gear shift lever.
CS-15
Control Systems
S501236A06
B3M0617C
B3M1828A
B3M0619B