Subaru Legacy 2002 Service Manual page 2276

3.0 L model
Disconnect pressure hose from oil pump. Discon-
nect return hose from reservoir tank.
CAUTION:
¼ Do not allow fluid from the hose end to come
into contact with pulley belt.
¼ To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1) Bolt A
(2) Pressure hose
(3) Return hose
B: INSTALLATION
1) Tighten bolt A.
CAUTION:
Visually check that hose between tank and pipe
D is free from bending or twisting.
Except 3.0 L model
(1) Bolt A
(2) Pipe C
(3) Pipe D
PIPE ASSEMBLY
B4M2434A
S601277A11
B4M1658B
PS-67
Power Assisted System (Power Steering)
3.0 L model
(1) Bolt A
(2) Pressure hose
(3) Return hose
(1) Connect pipe D or return hose to oil tank.
(2) Connect pipe C or pressure hose to oil
pump.
CAUTION:
Use anew gasket.
Tightening torque:
39 N·m (4.0 kgf-m, 28.9 ft-lb)
(3) Tighten bolt A.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
B4M2434A