Subaru Legacy 2002 Service Manual page 2240

7) Using ST, loosen lock nut.
ST 926230000 SPANNER
(1) Lock nut
8) Tighten adjusting screw until it no longer tight-
ens.
(1) Adjusting screw
9) Using a wrench [32 mm (1.26 in) width across
flats] or adjustable wrench, remove tie-rod.
CAUTION:
¼ Check ball joint for free play, and tie-rod for
bends. Replace if necessary.
¼ Check dust seals used with tie-rod end ball
joint for damage or deterioration. Replace if
necessary.
(1) Tie-rod
STEERING GEARBOX [LHD MODEL]
S4M0147B
S4M0148B
S4M0149B
PS-31
Power Assisted System (Power Steering)
10) Loosen adjusting screw and remove spring
and sleeve.
CAUTION:
Replace spring and/or sleeve if damaged.
(1) Adjusting screw
11) Remove two bolts securing valve assembly.
12) Carefully draw out input shaft and remove
valve assembly.
(1) Valve ASSY
S4M0148B
S4M0154
S4M0155B