Subaru Legacy 2002 Service Manual page 2192

B: INSTALLATION
1) Install in the reverse order of removal.
CAUTION:
¼ If cable clamp is damaged, replace it with a
new one.
¼ Never fail to cover outer cable end with boot.
¼ Be careful not to kink accelerator cable.
¼ Always use new clevis pins.
2) Adjustment of clutch pedal <Ref. to BR-54,
ASSEMBLY, Brake Pedal.>
3) Inspect after pedal installation <Ref. to BR-55,
INSPECTION, Brake Pedal.>
BRAKE PEDAL
S405541A11
BR-53
C: DISASSEMBLY
1. MT MODEL
S405541A0601
¼ LHD model
1) Remove the brake switch.
<Ref. to BR-56, REMOVAL, Stop Light Switch.>
2) Remove the clutch pedal.
<Ref. to CL-28, DISASSEMBLY, Clutch Pedal.>
3) Remove the clutch master cylinder bracket.
4) Remove bushing, spring and stopper.
(1) Stopper
(2) Bushing
(3) Brake pedal
(4) Brake pedal spring
5) Remove the brake pedal pad.
¼ RHD model
NOTE:
For disassembly procedures, refer to "AT MODEL".
<Ref. to BR-54, AT MODEL, DISASSEMBLY,
Brake Pedal.>
Brake
S405541A06
B4M2349
B4M2350A