Subaru Legacy 2002 Service Manual page 1972

1. SERVICE DATA
Front and rear bearing preload at companion
flange bolt hole N (kgf, lb)
Side gear backlash mm (in)
Side bearing standard width mm (in)
Crown gear to drive pinion backlash mm (in)
Crown gear runout on its back surface mm (in)
GENERAL DESCRIPTION
S303001E4901
New bearing
Used bearing
T-type 19.6 — 28.4 (2.0 — 2.9, 4.4 — 6.4)
VA-type 12.7 — 32.4 (1.3 — 3.3, 2.9 — 7.3)
T-type 8.34 — 16.67 (0.85 — 1.7, 1.87 — 3.75)
T-type 0.10 — 0.20 (0.0039 — 0.0079)
VA-type 0.05 — 0.15 (0.0020 — 0.0059)
T-type 0.10 — 0.20 (0.0039 — 0.0079)
VA-type 0.10 — 0.15 (0.0039 — 0.0059)
DI-3
Differentials
20.00 (0.7874)
Less than 0.05 (0.0020)