Subaru Legacy 2002 Service Manual page 2471

Hide thumbs Also See for Legacy 2002:

Table of Contents

CONTROL MODULE I/O SIGNAL

VDC (Diagnostics)

5. Control Module I/O Signal

A: ELECTRICAL SPECIFICATION

¼ The connector covers of LHD and RHD vehicles are in the reverse directions.

¼ The terminal numbers in the VDC control module connector are as shown in the figure.

¼ When the connector is removed from the VDCCM, the connector switch closes the circuit between ter-

minal No. 53, No. 54 and No. 55. The ABS and VDC warning light illuminate.

Chapters

Table of Contents