Subaru Legacy 2002 Service Manual page 1593

Automatic Transmission
28) Remove transmission rear crossmember from
vehicle.
29) Remove transmission.
CAUTION:
Move transmission and torque converter as a
unit away from engine.
30) Separate transmission assembly and rear
cushion rubber.
B: INSTALLATION
1) Install rear cushion rubber to transmission
assembly.
Tightening torque:
39 N·m (4.0 kgf-m, 29 ft-lb)
2) Install ST to torque converter clutch case.
ST 498277200 STOPPER SET
3) Install transmission onto engine.
AUTOMATIC TRANSMISSION ASSEMBLY
B2M3407
B2M0035
S502207A11
H2M1961A
(1) Gradually raise transmission with transmis-
sion jack.
(2) Engage them at splines.
4) Install transmission rear crossmember.
Tightening torque:
T1: 35 N·m (3.6 kgf-m, 26 ft-lb)
T2: 70 N·m (7.1 kgf-m, 51 ft-lb)
5) Take off transmission jack.
AT-22
B2M0035
B2M3407A