Subaru Legacy 2002 Service Manual page 2511

Hide thumbs Also See for Legacy 2002:

Table of Contents

DIAGNOSTICS CHART WITH DIAGNOSIS CONNECTOR

VDC (Diagnostics)

F: DTC 21 ABNORMAL ABS SENSOR (OPEN CIRCUIT OR INPUT VOLTAGE

TOO HIGH) (FRONT RH)

For diagnostic procedure, refer to DTC 27. <Ref. to VDC-52, DTC 27 ABNORMAL ABS SENSOR (OPEN

CIRCUIT OR INPUT VOLTAGE TOO HIGH) (REAR LH), Diagnostics Chart with Diagnosis Connector.>

G: DTC 23 ABNORMAL ABS SENSOR (OPEN CIRCUIT OR INPUT VOLTAGE

TOO HIGH) (FRONT LH)

For diagnostic procedure, refer to DTC 27. <Ref. to VDC-52, DTC 27 ABNORMAL ABS SENSOR (OPEN

CIRCUIT OR INPUT VOLTAGE TOO HIGH) (REAR LH), Diagnostics Chart with Diagnosis Connector.>

H: DTC 25 ABNORMAL ABS SENSOR (OPEN CIRCUIT OR INPUT VOLTAGE

TOO HIGH) (REAR RH)

For diagnostic procedure, refer to DTC 27. <Ref. to VDC-52, DTC 27 ABNORMAL ABS SENSOR (OPEN

CIRCUIT OR INPUT VOLTAGE TOO HIGH) (REAR LH), Diagnostics Chart with Diagnosis Connector.>

I: DTC 27 ABNORMAL ABS SENSOR (OPEN CIRCUIT OR INPUT VOLTAGE

TOO HIGH) (REAR LH)

¼ Faulty ABS sensor (Broken wire, input voltage too high)

¼ Faulty harness connector

TROUBLE SYMPTOM:

¼ ABS does not operate.

¼ VDC does not operate.

Chapters

Table of Contents